Product information

Exclusive technology Ultra Nano Titanium brings antibacterial and superior air cleaning impact while increasing the smooth and glossy level of the building. Under the Photocatalysis mechanism, millions of Nano Titanium Dioxide will “trap” all harmful Formaldehyde in the air and turn them into safe steam for users.

Technical data:

– Ingredients: Titanium Dioxide, Acrylic resin, Molding agent, mineral powder, auxiliary substances, …
– Surface drying time: 30 – 60 minutes
– Recoat: 6-12 hours (average temperature 30°C humidity of the environment is about 80%)
– Number of paint layers: 2 coats
– Theoretical coverage: 10 – 13 m²/ liter/coat, depends on wall surface


Surface preparation:
– All surfaces must be dry, free from dust, grease, lime, and old paint.
– New walls need to be dry for at least 25-30 days under normal conditions (average temperature ≥ 30°C, humidity of the environment is about ≤80%).
– The wall surface has been rolled with at least 2 layers of alkali resistant paint S400 and allowed to dry
– The exterior surface of the house must be waterproofed using specialized waterproofing products such as S500, S550, or the S450 and S650 product line.
– Make sure 2 coats of alkaline resistant paint S400 are completely dry for 18-24 hours before rolling the first layer of super-gloss titanium paint S600.
– Add more amount of clean water maximum 5% to get a suitable liquid. If preparing exceeds indicated volume, it may reduce the quality of paint.
– Stirring well before painting. Use up the mixture after adding water.
– Apply 2-3 coats by smooth roller, brush. Allow at least 6- 12 hours before recoating.
– It should be applied in good weather conditions don’t apply when the surface temperature is over 35°C and not less than 9°C.
– Cleaning tools: Clean tools with water after use.

Store in a cool, dry, ventilated place. Place the paint can in a safe, upright position and close the lid tightly

Health and save

No flammable, no lead, mercury, and other toxic substances should be safe for construction workers and users.

Note: The weight on the package may be with tolerance of ±2%