Tool
m2
lít
Capacity
{{getAttrName(a)}}

Product information

With extensive experience in water treatment and waterproofing solutions, Pencco’s R&D team in Texas has developed specified crystal technology ACC – American Crystalize Coating in which negative-side waterproofing, alkali resistance and salt resistance are 10 times more effective than conventional alkali resistant paints.

Technical data:

Ingredients: Titanium dioxide, Polymer Acrylic Styrene, Calcium Carbonate, Kaolin, Silicone waterproofing agent, surface-active additives, etc

-Surface drying time: 30 – 60 minutes

-Recoat: 6 – 12 hours (average temperature 30°C humidity of the environment is about 80%)

-Number of paint layers: 2 coats

-Theoretical coverage: 6 – 8 m²/ liter/coat, depends on wall surface

Use

Surface preparation:

– All surfaces must be dry, free from dust, grease, lime, and old paint.

– New walls need to be dry for at least 25-30 days under normal conditions (average temperature ≥ 30°C, humidity of the environment is about ≤80%).

Construction:

-Add more amount of clean water  maximum 5% to get a suitable liquid. If preparing exceeds indicated volume, it may reduce the quality of paint. Stirring well before painting. Use up the mixture after adding water.

-Apply 2-3 coats by smooth roller, brush. Allow at least 6-12 hours before recoating.

-It should be applied in good weather conditions don’t apply when the surface temperature is over 35°C and not less than 9°C.

-It is possible to cool the surface with a most roll, in case the dry weather can add a bit of water.

-Cleaning tools: Clean tools with water after use.

Store in a cool, dry, ventilated place. Place the paint can in a safe, upright position and close the lid tightly.

Health and save

No flammable, no lead, mercury, and other toxic substances should be safe for construction workers and users.

phone