Tool
m2
lít
Capacity
{{getAttrName(a)}}

Product information

Technical data:

– Ingredients: Titanium Dioxide, Acrylic resin, film-forming agent, active additives, auxiliary substances, etc.

– Surface drying time: 30 – 60 minutes.

– Recoat: 6 – 12 hours (average temperature 30°C humidity of the environment is about 80%).

– Number of paint layers: 2 coats.

– Theoretical coverage: 5 – 7 m²/ liter/coat, depends on wall surface.

Use

User manual:

Surface preparation:

– All surfaces must be dry, free from dust, grease, lime, and old paint.

– New walls need to be dry for at least 25-30 days under normal conditions (average temperature ≥ 30°C, humidity of the environment is about ≤80%).

– The exterior surface of the house must be waterproofed using specialized waterproofing products such as S500, S550, or the S450 and S650 product line.

Construction:

– If it is thick, add more maximum 5% of clean water depending on temperature and humidity. If preparing exceeds indicated volume, it may reduce the quality of paint. Stirring well before painting. Use up the mixture after adding water.

– Apply 2-3 coats by smooth roller, brush. Allow at least 6-12 hours before recoating..

– It should be applied in good weather conditions don’t apply when the surface temperature is over 35°C and not less than 9°C.

-It is possible to cool the surface with a most roll, in case the dry weather can add a bit of water.

– Cleaning tools: Clean tools with water after use.

Store in a cool, dry, ventilated place. Place the paint can in a safe, upright position and close the lid tightly.

Health and save

No flammable, no lead, mercury, and other toxic substances should be safe for construction workers and users.

phone